Integration Water Purification System at SK Runchang, Pahang and SK Ulu Geruntum, Perak

 

We are successfully to design, supply, delivery and commissioning of 2 set Integrated Water Purification System at 2 difference locations which is Sekolah Kebangsaan (SK) Runchang, Pahang and Sekolah Kebangsaan (SK) Ulu Geruntum, Perak. This project is collaboration between Ministry of Higher Education (MOE), Universiti Teknologi Malaysia (UTM), Universiti Teknologi Mara (UiTM), Advanced Membrane Technology Research Centre (AMTEC) and Universiti Malaysia Pahang (UMP).

 

Fabrication of Water Purification system at warehouse

 

                                                 Progress installation Integrated Water Purification System at Sekolah Kebangsaan Runchang, Pahang.                                                                                                                                                                     

                                             

                                             

                                             

                                             

 

                                                      

                                            Progress installation Integrated Water Purification System at Sekolah Kebangsaan Ulu Geruntum,Perak

                                              

                                                              

                                              

                                                                                

 

 

15th Aseanian Membrane Society (AMS) Conference 2025

Atama Tech has been invited to join as participant in 15th Aseanian Membrane Society (AMS) 2025 Conference at Berjaya Times Square Kuala Lumpur, Malaysia on 19 - 21 August 2025 with more than 500 participants join in this conference from all over the world.

The conference topics that being highlight including are Reverse Osmosis and Forward Osmosis, Novel membrane and process, Water and wastewater treatment, Ion Transport membrane and process, Inorganic membrane, Nano-filtration, Desalination and many more.

To Supply, Install and Training for Motor Transformer Maintenance and Testing Training System to Vocational College Pasir Gudang

Hi all!
 
Glad that we are finally complete to supply, install and training for Motor Transformer Maintenance and testing training system to Vocational College Pasir Gudang under Technical & Vocational Education Training (TVET) programme. Special thanks for Mr Arif and team for their endless cooperation with our technical person, Mr Abdas from delivery the item until training session complete.
 
Fyi, DLWD-DJB02 Motor Transformer Maintenance and Test Training System is the training platform for remove, rewind, assembling, test, data analysis and other skills training of single-phase transformers, single-phase capacitor induction motor, three-phase squirrel cage induction motor and separately excited DC motor etc.
 
The equipment is also equipped with three-phase AC adjustable power supply, DC power supply, DC measurement instrument, AC measurement instrument & digital multi-function wattmeter, Motor power supply and test instrument. Beside the above instruments, there are motor inserting tools, Manual digital winding counter.
 
    
 
  

Repair and service work for Firing Furnace at Faculty of Mechanical Engineering, UTM Johor

Repair and service work for Firing Furnace at EO2 Building, Faculty of Mechanical Engineering UTM.
 
Thanks to Mr Saleem, assistant engineer for EO2 laboratory (Makmal Tuangan Logam) and Mr Suzaimi, our technician
ensuring progress complete within the timeframe.
 
Repairing and service work include replacing default part of the heater element, ceramic ring and insulator,
fiberglass blanket, and other small parts.
 
 
  
  
 
 
 
 
 
 
 
 
 
 
 
 

3D Laser Scanning & Modelling for 24 nos of Train Coach

Assembly of millions 3D measurement data points that provide an exact digital reproduction of existing condition in point cloud software.

During pre-data scanning phase, we estimate to complete the job task within 30 days include data scanning, registration point cloud, modelling

and as built drawing for 24 nos of train coaches. Data collection and modelling include internal and external of the train.

The narrow space with specific different interior detailing in each coaches and another active train coaches operates normally beside site became

one of our challenges in completing this project. Although there were much obstacle we faced, we successfully

complete and deliver the point cloud and as built drawing thing timeframe and fulfil specification required by client.

        

1.0 Data collection gathered and merged into point cloud

 

2.0 Point Cloud input turns into 3D modelling data using Autodesk Revit

 

3.0 3D Modelling for internal layout one of the coach

 

 

4.0 Final Output of as-built drawing were generated 

More Articles ...

Page 1 of 4

Atama Tech Info

Atama Tech Sdn Bhd (629356-T)
Lot 1 , Kompleks Usahawan Teknologi MARA
Jalan Pontian Lama
81300 Johor Bahru, Johor
Malaysia

Email : This email address is being protected from spambots. You need JavaScript enabled to view it.

Phone No: +607 5121518

https://goo.gl/maps/RJUdxZx18bQ2